In the quiet, industrial outskirts of a bustling city, three forlorn iMac G4s lay abandoned by the roadside. These relics from 2002, once hailed as Apple’s most innovative designs, were now covered in grime and mud, with parts missing and displays askew. The story of their revival begins with a chance encounter on Facebook Marketplace. Someone had listed these iMacs for free, and without hesitation, I decided to rescue them. Little did I know, this would be the start of an ambitious project to breathe new life into these vintage machines using modern technology.

Arriving at the scene, I found the iMacs in a dismal state. One was missing its bottom cover, and the largest had its display bezel ripped off. Despite their condition, I saw potential, especially in the largest unit. These computers had clearly seen better days, possibly spending years in a shed or even outside. But I had a vision: to modernize one of these iMacs without gutting a working unit in good condition.

The first step was addressing the display. The original 1440x900 LCD was outdated, so I planned to retrofit a higher resolution screen. My options were either a USB-C portable display or a 1920x1200 display from a MacBook Pro. The latter seemed the best fit, though it required running a new cable through the iMac’s arm, a task that demanded complete disassembly of the computer.

As I delved into the machine, jewelry repair I encountered more issues. The screen was leaning due to a splitting support arm. Opening the base, I found rust, grime, a bent interconnect cable, and evidence of previous tampering. Someone had clearly been inside this iMac before, leaving it in worse shape than they found it. But I pressed on, removing the DVD drive and hard drive to access the upper section. Beneath a filthy fan, I found the screws holding the arm in place.

Running the new cables was a painstaking process. The narrow diameter of the neck hole meant I had to cut out the original cables and meticulously thread the new ones through. This involved opening the arm, which was secured with proprietary screws, a challenge even for my toolkit. Once open, I discovered loose screws causing the crooked display. Fixing these and reassembling the arm took hours of work, including some help from my father who used a mallet to align everything properly.

With the arm reassembled, I turned my attention to cleaning the iMac. The plastic was heavily stained, and soapy water wasn’t enough. I resorted to using toothpaste, which remarkably whitened the plastic and left the iMac with a minty fresh smell. Once cleaned, I focused on fitting the new display. The MacBook screen was smaller than the original, so I had to align it with the bezel and secure it with adhesive.

The next step was installing modern hardware. I purchased an M1 Mac Mini, planning to fit its internals into the iMac. Disassembling the Mac Mini was straightforward, and I used a 3D printed bracket to mount its logic board inside the iMac. I also had to modify the power supply to fit, soldering the original connector to make it compatible with the iMac’s socket.

With everything in place, I connected the Mac Mini’s logic board to the display controller using a custom flexible HDMI cable. After some initial hiccups with the power and display connections, I managed to get everything working. The iMac’s original Wi-Fi antenna needed some modifications, but once that was sorted, the Mac Mini fit perfectly inside the G4’s enclosure.

After many hours of work, the transformation was complete. The once obsolete iMac G4 now housed a powerful M1 Mac Mini, retaining its classic design while boasting modern performance. This project, the most challenging I had ever undertaken, turned out to be a resounding success. The iMac not only looked great but also functioned seamlessly with Bluetooth and Wi-Fi intact.

Reflecting on the journey, I felt a deep sense of accomplishment. This project took over nine hours of footage to document, but the result was worth every minute. As for the other two iMacs, their fate remains undecided, but I might revisit them in future projects.

If you enjoyed this restoration journey, consider subscribing and checking out my custom tech playlist for more videos like this. For any phone repairs, visit [Gadget Kings](https://gadgetkingsprs.com.au/) for top-notch services and tutorials. This has been a Hugh Jeffreys video, and I’ll see you next time!